聯系方式:400-990-3999 / 郵箱:sales@xiyashiji.com
西亞試劑 —— 品質可靠,值得信賴
訂貨編號 | 產品名稱 | 規格 | 包裝 | 原價 | 現價 | 數量 | 操作 |
---|---|---|---|---|---|---|---|
A33263-100mg | (-)-1,2-雙((2R,5R)-2,5-二甲基磷皂)苯(環辛二烯)銠(I)四氟硼酸鹽 | ≥97.0% | 100mg | 1330.00 | 1330.00 |
|
質量標準
危險屬性
化學性質
采購詢價
問答
1. 分析化合物的結構
化合物名稱:(-)-1,2-雙((2R,5R)-2,5-二甲基磷皂)苯(環辛二烯)銠(I)四氟硼酸鹽
從名稱中可以提取以下信息:
- 該化合物包含一個銠(Rh)原子。
- 含有兩個 (2R,5R)-2,5-二甲基磷皂基團。
- 含有一個苯環和一個環辛二烯配體。
- 還包含一個四氟硼酸鹽(BF??)離子。
2. 確定各部分的分子式
# 銠(Rh)
- 銠的原子量約為 103 g/mol。
# 磷皂基團 (2R,5R)-2,5-二甲基磷皂
假設每個磷皂基團的分子式為 C?H??P(具體結構需要更詳細的信息,但這里我們假設它主要由碳、氫和磷組成)。
# 苯環 (C?H?)
- 苯的分子式為 C?H?,分子量為 77 g/mol。
# 環辛二烯 (C?H?)
- 環辛二烯的分子式為 C?H?,分子量為 104 g/mol。
# 四氟硼酸鹽 (BF??)
- 四氟硼酸根離子的分子式為 BF??,分子量為 87 g/mol。
3. 計算總分子量
將各部分的分子量相加:
- 銠 (Rh): 103 g/mol
- 兩個磷皂基團: 2 × (8×12 + 12 + 31) = 2 × (96 + 12 + 31) = 2 × 139 = 278 g/mol
- 苯環: 77 g/mol
- 環辛二烯: 104 g/mol
- 四氟硼酸鹽: 87 g/mol
總分子量 = 103 + 278 + 77 + 104 + 87 = 649 g/mol
4. 質量指標
根據上述計算,該化合物的摩爾質量(分子量)為 649 g/mol。
總結
(-)-1,2-雙((2R,5R)-2,5-二甲基磷皂)苯(環辛二烯)銠(I)四氟硼酸鹽的質量指標如下:
- 摩爾質量: 649 g/mol
GHS分類
GHS(全球協調系統)分類是用于統一化學品和危險貨物的分類和標簽的國際系統。對于具體化合物,其GHS分類可能包括以下方面:
- 健康危害:根據化合物對健康的影響,如急性毒性、皮膚腐蝕/刺激、嚴重眼損傷/眼刺激、呼吸或皮膚過敏、生殖細胞突變性、致癌性等進行分類。
- 物理危害:考慮化合物的物理狀態(如固體、液體、氣體)、沸點、熔點、蒸汽壓等因素。
- 環境危害:評估化合物對水生環境的潛在危害。
- 其他危害:包括特定目標器官毒性(一次接觸)、特異性靶器官毒性(重復接觸)等。
安全術語與風險術語
安全術語(Precautionary statements)和風險術語(Hazard statements)是根據GHS分類得出的,用于描述化學品的危害和應采取的預防措施。例如:
- 風險術語:可能包括“致癌”、“致突變”、“對生育能力有害”等。
- 安全術語:可能包括“避免吸入氣體/煙霧/蒸氣/噴霧”、“操作后徹底清洗”、“穿戴適當?shù)姆雷o服”等。
急救措施
針對意外接觸或攝入的情況,急救措施可能包括:
- 皮膚接觸:立即脫去污染的衣物,用大量肥皂水和水清洗。
- 眼睛接觸:提起眼瞼,用流動清水或生理鹽水沖洗至少15分鐘。
- 吸入:迅速脫離現場至空氣新鮮處,保持呼吸道通暢,如呼吸困難,給輸氧;如呼吸停止,立即進行人工呼吸并就醫。
- 食入:飲足量溫水,催吐并就醫。
消防措施
- 滅火方法:根據化合物的燃燒特性選擇合適的滅火劑,如干粉、二氧化碳、砂土等。
- 注意事項:禁止用水、泡沫和酸式滅火劑滅火,因為某些化學品可能與這些物質發生反應。
泄漏應急處理
- 個人防護:佩戴自給正壓式呼吸器,穿防酸堿工作服,戴橡膠手套。
- 泄漏處理:隔離泄漏污染區,限制出入,切斷火源,并根據實際情況使用適當?shù)那鍧崉┗蛭絼┻M行處理。
廢棄處置
廢棄處置方法應根據當?shù)胤煞ㄒ?guī)和環保要求進行,可能包括回收利用、焚燒或安全填埋等。
安全數據表
安全數據表(SDS)是包含化學品所有安全信息的綜合性文件,通常包括以下部分:
1. 化學品及企業標識
2. 危險性概述
3. 成分/組成信息
4. 急救措施
5. 消防措施
6. 泄漏應急處理
7. 操作處置與儲存
8. 接觸控制和個體防護
9. 理化性質
10. 穩定性和反應活性
11. 毒理學信息
12. 生態學信息
13. 廢棄處置
14. 運輸信息
15. 法規信息
16. 其他信息
1. 配位化學性質:該化合物包含一個銠(I)中心, surrounded by various ligands, including a 1,2-bis((2R,5R)-2,5-dimethylphospholyl)benzene ligand, a cyclooctadiene (cod) ligand, and a tetrafluoroborate counterion. The rhodium center is likely to be coordinatively unsaturated, making it a good candidate for further coordination with other ligands or substrates.
2. 光學活性:The compound contains chiral centers in the phospholyl groups, which are designated as (2R,5R). This chirality can lead to optical activity, meaning the compound can rotate plane-polarized light. The specific rotation will depend on the absolute configuration of the chiral centers.
3. redox properties: Rhodium(I) complexes can undergo redox reactions, either being oxidized to rhodium(III) or reduced to rhodium(0). The presence of the electron-rich phospholyl ligands and the cyclooctadiene ligand can stabilize the rhodium(I) oxidation state, but the compound may still be susceptible to redox reactions depending on the reaction conditions.
4. reactivity towards electrophiles and nucleophiles: The phospholyl ligands are electron-rich and can react with electrophiles. The rhodium center can also act as a Lewis acid, making the complex reactive towards nucleophiles. The cyclooctadiene ligand can participate in cycloaddition reactions with electrophiles.
5. thermal stability: The thermal stability of the compound will depend on the strength of the Rh-P and Rh-C bonds, as well as the stability of the tetrafluoroborate counterion. Generally, rhodium(I) complexes with phosphine ligands are stable at moderate temperatures, but they can decompose at high temperatures or under harsh conditions.
6. solubility: The solubility of the compound will depend on the polarity of the solvent and the nature of the ligands. The presence of the tetrafluoroborate counterion can increase the solubility in polar solvents, while the phospholyl and cyclooctadiene ligands can increase the solubility in non-polar solvents.
7. spectroscopic properties: The compound will exhibit characteristic spectroscopic properties based on its structure. For example, the phospholyl ligands can give rise to phosphorus NMR signals, the cyclooctadiene ligand can give rise to olefinic proton NMR signals, and the rhodium center can give rise to UV-Vis absorption bands.